Deep, intense colors, pleasant handling and easy installation were the goals when developing this tubing generation. The result is a great choice of sizes and colors such as red, green, blue or black.
When designing these tubes, one goal was to make colored coolant and hence the strain from coloring particles on the cooling loop obsolete. With these tubes the color comes from the tubes themselves.
Besides color, the installation and kinking properties are always an important factor when choosing tubing. Tight bending radiuses and easy handling in tricky situations were also taken into consideration during development. Hence the plastic mixture was developed to perfection and we have created tubing which manages to combine usually opposing properties to please both beginners and advanced users.
- Material: PVC
- Color: Transparent
- Inner diameter: 10mm, 3/8“
- Outer diameter: 13mm, ½“
- Wall thickness: 1,5mm, 1/15“
Extent of delivery
- 1x Alphacool Schlauch AlphaTube HF 13/10 (3/8"ID) - Klar 3m (9,8ft) Retailbox
Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days.
We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool.
Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.
|Culoare UV:||nicht UV-aktiv|
|Temp max de operare:||4 bar (bei 20°C)|
|Temperatura service:||-20°C la 60°C|
|Diametru exterior:||13mm (1/2")|
|Diametru interior:||10mm (3/8")|
Faceți clic aici pentru a afișa această întrebare.
Faceți clic aici pentru a vedea aceste evaluări.
Good bending radius. Great to work with. Transparent and well made.
Zuerst kam ein kleiner Schock. Der Schlauch ist nämlich nicht "klar" sondern etwas "trüb" bzw. "milchig". Das Ergebnis nach dem Einbau hat die bedenken jedoch schnell aus dem Weg geräumt, sieht wirklich sehr hübsch aus! Lässt sich gut schneiden und verlegen. Etwas engere Bogenradien sind auch möglich ohne das er sofort abknickt. Übertriebene 90° Winkel kann man natürlich nicht realisieren, das sollte jedem klar sein. Kaufempfehlung von mir, gerade des geringen Preises wegen.