- Article no.: 65047
- Manufacturer no.:
- EAN: 4049469053741
- Weight: 0,03 kg
3 gata de livrare, timp de livrare 1-3 zile
Preturi incl. VAT plus shipping costs
The male part of the High-End quick release coupling. The new generation of quick release couplings was specially designed for Highflow systems. It has the great quality of manufacturing that everyone is used to receive from Aquatuning. Both the male and female connector are equipped with a special profile to ensure that the pieces cannot cant, therefore ensuring that the connector is always sealed properly.
When connected the silicone ring of the male connector additionally expands to make contact with the female connector's inner wall to ensure the best seal possible.
To avoid any loosening when in use the two pieces are additionally connected by twisting them, making it impossible to separate them until they are twisted back.
The coupling is equipped with a 10mm barbed fitting for hoses with an inner diameter of 10mm.
Material: Nickel coated brass
Hose connector: 10mm (3/8")
Overall length: 47mm
Extent of delivery:
1x Quick release coupling 10mm barbed fitting male
Important note regarding use of the connectors:
To ensure a tight seal between coupling and plug the units are designed for a very tight fit. When repeatedly plugging the connectors in and out, this may lead to roughening of the O-ring or even tearing of the gasket. Hence the gaskets should always be kept moist when plugging the connection in or out! A torn gasket is not covered by the warranty but is rather caused by incorrect use of the unit. Spare O-rings can be ordered with the item number 95002.
Note: For operation of the coupling the female part is required (Art. No 65036 or 65037)
Info: Not entirely leak-proof, meaning that 1-2 drops may spill after separation)
Diverse Schnellkupplungen im Vergleich bei Aquainfos
10mm (3/8") hose clamp: up to 8mm none, from 10mm up required
10mm (7/16") hose clamp: up to 8mm none, from 10mm up required
12mm (1/2") hose clamp: up to 11mm none, from 12mm up required
13mm (1/2") hose clamp: up to 11mm none, from 13mm up required
|1. Lateral:||Fitinguri stratificate 10mm (3/8")|
|2. Lateral:||Descarcare rapida mascul|
Faceți clic aici pentru a afișa această întrebare.