Your watercooling and modding distributor
10mm (3/8") fitting G1/4 with O-Ring (High-Flow) - Short - Silver
- Article no.: 63252
- Manufacturer no.:
- EAN: 4049469071981
- Weight: 0,013 kg
> 250 disponibil în stoc
Robust high-quality nickel plated barbed fitting with cylindrical thread (G1/4"). The fitting is suitable for PVC, PU, PA, silicone and PE hoses with an inner diameter of 10mm. With integrated 1/4" Perbunan(r) O-Ring seal.
We recommend the use of hose clamps or zip ties for best possible safety!
Note for watercooling beginners:
The connectors for hoses(7/16", 3/8",1/2") are provided with measurements in mm in our shop. These can differ by +-1mm, which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp, a larger fitting should be chosen. With some fittings that tend to be larger, it is possible though that a hose with an inner diameter of 13mm actually does seal without a hose clamp.
Overview:
10mm (3/8") hose clamp: up to 8mm none, from 10mm up required
10mm (7/16") hose clamp: up to 8mm none, from 10mm up required
12mm (1/2") hose clamp: up to 11mm none, from 12mm up required
13mm (1/2") hose clamp: up to 11mm none, from 13mm up required
| Rotativ: | Nu |
| Material: | Alama |
| Lungime filet: | 5mm |
| Compatibilitate: | Tubaj flexibil (PVC, Silikon, Neoprene), Tubaj rigid (PUR) |
| 2. Lateral: | G1/4" filet exterior |
| Culoare: | argintiu nichelat |
| Specificatii: | Forma: Drept |
| Producator: | Aquatuning |
| 1. Lateral: | Fitinguri stratificate 10mm (3/8") |
