|Compatibilitate pompa:||Pentru Laing DDC|
|Conector:||G1/4" filet interior|
|Dimensiuni:||148cm x 136cm x 42mm|
|Model rezervor:||1x 5 1/4" Bayres|
|Orificiu LED:||vorhanden (für 5mm LEDs)|
|Port de umplere:||G1/4" filet interior|
Koolance presents their newest accessory for the Laing DDC pump: A single reservoir!
Koolance, probably one of the most popular water cooling manufacturers from the US, has again designed a product which remains unmatched in design and performance. This reservoir is designed for installation in a 5.25" drive bay, occupying only little space and being integrated elegantly into the enclosure.
The elegant design of the reservoir can be underlined with two 3mm LEDs which light up the inside from below.
Performance-wise this reservoir is the perfect companion for the most popular pump in the water cooling sector today. it is possible to operate one or two pumps at the same time. Depending on the setting made on the reservoir they can be used to drive two separate loops or to be used in line for maximum pump performance.
To fully utilize that power and to avoid air bubbles from being sucked in, the inside of the reservoir is equipped with a special geometry which keeps air bubbles away from the pump inlets. For filling the reservoir can simply be pulled out from the drive bay a bit and the filling openings are unveiled. Simply remove the screw plug and you are set!
Installation in the reservoir is achieved with the standard mounting openings in the 5.25" drive bay.
Warning: Please note that the Koolance guarantee only remains valid if this product is operated with distilled water (pure water) or with water additives and / or finished mixtures of the following manufacturers: Koolance, Alphacool, Aquacomputer, Innovatek and Phobya. If other liquids are used the warranty may no longer be given.
Dimensions (WxLxH): 14,8cm x 13,6cm x 4,2cm
Capacity per chamber: 80ml
LED openings: 2x 3mm
Extent of delivery:
Koolance RP-401X2 Single 5.25" Reservoir for 1-2 PMP-400 Pumps Rev.1.1
English illustrated mounting manual
Please note: Pump and adaptor for dual operation not included with the reservoir
Note: For mounting of the DDC pumps the mounting hole brackets at the side may be in the way, simply remove them to make the pumps fit.