Your watercooling and modding distributor Your watercooling and modding distributor

Alphacool Eispumpe VPP755 - G1/4 inner thread including Eisdecke D5 - Acetal V.3

  • 1013347
  • 13305
  • 4250197133050
  • 1 kg

> 50 disponibil în stoc

92,99 € *

Preturi incl. VAT plus shipping costs

VPP755 Eispump Technical Specifications Dimensions (DxH): 60 x 53.5mm Cable length: 50cm...more
Product Information

VPP755 Eispump Technical Specifications

  • Dimensions (DxH): 60 x 53.5mm
  • Cable length: 50cm
  • Standard voltage: 12V DC
  • Power consumption: 14W
  • Permitted voltage: 8-13V DC
  • Pressure at 12V: 4m water head
  • Maximum flow rate: 350l/h
  • Pump medium: water, water/glycol mixture
  • Maximum system temperature: 65ºC
  • Power connection: 4-pin molex
  • Tach signal: 3-pin
  • PWM signal: 4-pin
  • Special feature: adjustable in five levels
    • Level 1: 1800 RPM
    • Level 2: 2500 RPM
    • Level 3: 3200 RPM
    • Level 4: 3900 RPM
    • Level 5: 4500 RPM

Eisdecke Technical Specifications

  • Dimensions: 80 x 80 x 40mm
  • Dimensions with stands: 83 x 80 x 87mm
  • Material: acetal
  • Connections: 5x 1/4" threads

Scope of Delivery

  • 1x Alphacool Eispump VPP755 - G1/4 IT incl. Eisdecke D5 - Acetal V.3

 

CAUTION
Removing the impeller from the ceramic shaft will cause the upper ceramic clamping ring to over-expand, which will destroy it! Removal will void the pump’s warranty!

If the pump is put together again and put back into operation, the clamping ring will loosen, which is not accepted as grounds for a return or exchange...

Notice:

Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days.

We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool.

Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.

Awards and documents
Technical details and videos ... moor
Technical details
Culoare: negru
Amplitudine max: Bine facut (2 la 4m), 3,7m
Conector alimentare: 4Pin Molex
Voltaj: 12V DC
Dimensiuni: 95 x 45 x 80mm
Debit max: 1500l/h, Extrem (größer 1400l/h)
Debit apa: G1/4" filet interior
Material: Kunststoff, Keramik
Admisie apa: G1/4" filet interior
Temperatura maxima sistem: 60° C
Fluide aprobate: Wasser, Wasser/Glykol-Gemisch
Altele: Incl. Acetal cuplaj
Gama de control posibila: 8-24V DC
Producator: Alphacool
Putere intrare: 23W
Videos
Questions & Answers more
Questions & Answers
Question from Oleg Y. from 12. December 2017
What is correct max flow ? On teh Detail page (1500l/h) or description page (350l/h)
Antwort von Aquatuning GmbH vom 12. December 2017
The Max flow is not important. If you are using one fitting, you will lose the half of the max flow. It is more important to check the maximum delivery height.
Question from Jackson A. from 01. January 2018
What mounts are combadable with the legs on the pump top????
Antwort von Aquatuning GmbH vom 01. January 2018
For a small reservoir. You can find it in our shop with this article number: 1011327
2 Întrebări în alte limbi.
Faceți clic aici pentru a afișa această întrebare.
Question from Didier J. from 12. December 2017
je vous ai acheté cette article mais j'ai un reservoir EK-RES X3 250, est ce que j'ai besoin d'un adapteur et si oui lequel ?
Antwort von Aquatuning GmbH vom 12. December 2017
Ils ont besoin d'un haut de pompe séparé. Vous ne pouvez pas monter directement une pompe dans le réservoir d'expansion.
Antwort von Didier J. vom 12. December 2017
Je ne comprend pas votre réponse, pouvez-vous m'orienter sur un article qui serait compatible au reservoir EK RES X3 250 avec cette pompe
Question from Ramon A. from 06. June 2018
I have an alphacool lightower 150 lite, can I mount the d5 pump to it with this item? I mean, is this the same item that comes with the already d5 compatible lightower reservoir? If not, where can I find that item? I want to buy that separately so I can put it in my lightower 150 to be able to put my pump directly under it just like in your 1011328 article.
Antwort von Aquatuning GmbH vom 07. July 2018
There is no possibility to mount a D5 pump to the lighttower. You only can mount pumps from phobya or eheim, take a look at the discription by the lighttower please. If you want to mount a D5 pump with a reservoir, please take a look at the Eisbecher reseroirs for D5.
ai o intrebare?
Înștiințare: Întrebarea dvs. va fi vizibilă publicului și poate fi răspunsă de un membru al comunității noastre, precum și de echipa noastră de asistență. Puteți edita numele de utilizator public și setările dvs. de notificare prin e-mail în contul dvs. de client.
Read, write and discuss reviews...more
Reviews
5 stele:
(0)
4 stele:
(0)
3 stele:
(0)
2 stele:
(0)
1 stele:
(0)
Scrie o recenzie
Înștiințare: Revizuirea dvs. va fi publicată după ce este eliminată manual.
-3%
NOU