Alphacool's new Low Noise Edition of the Laing DDC for absolute silence!
The Laing DDC pump is one of the best known pumps in the watercooling industry. Recently we have been working with Laing to take the DDC to the next level. The new Laing DDC310 was designed with a perfect balance of power and silence in mind. Unlike other versions with the plastic base we have revised the design with new superbly tuned brass housing which aids the pumps cooling and guarantees longer life especially when placed in areas with limited airflow.
This new housing promises a longer life of the pump. Through the cooling fins and air flow as well as an internal thermal pad attached directly to the pump board maximum cooling is achieved.
Another feature is the included decoupling option. If a pump top with a M4 threaded mounting hole, such as the Alphacool Laing DDC Acetal top is present. The special M4 screws can be screwed directly into the decoupling set and then into the case.
The pump also comes as standard with an anti-vibration mounting system . Available in black nickel and silver nickel.
This pump should be the first choice for your watercooling system.
- Dimensions: 61 x 60 x 21mm
- Color: Silver nickel, black
- Power consumption: 10W
- Material: Brass, Stainless Steel, Aluminium oxide, hard coal
- Maximum lifting height: 2,44m
- Maximum system temperature: 60 ° C
- Maximum flow: 200l / h
- Voltage: 12V DC
- Power connector: 4 Pin Molex
- Tacho signal: 3-Pin Molex
Scope of delivery
- 1x Alphacool Laing pump DDC310
- 1x Alphacool Laing DDC bottom metal - silver nickel
- 1x Thermal
- mounting material
Not suitable for continuous operation with liquids containing titanium dioxide or glycerine. Typically, many pastel colors use these additives.
Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days.
We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool.
Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.
|Conector alimentare:||4Pin Molex|
|Debit max:||200l/h, Standard (kleiner 500l/h)|
|Amplitudine max:||2,44m, Bine facut (2 la 4m)|
|Debit apa:||Nu este valabil|
|Admisie apa:||Nu este valabil|
|Material:||Hartkohle, Alama, Aluminiumoxid|
|Temperatura maxima sistem:||60° C|
|Fluide aprobate:||Wasser, Wasser/Glykol-Gemisch|
|Dimensiuni:||61 x 60 x 21 mm|
Faceți clic aici pentru a afișa această întrebare.
Faceți clic aici pentru a vedea aceste evaluări.
Great pump and really clean looking cover. The decoupling hardware needs some work, at least when suggesting this pump to be matched with a Aquacomputer Aqualis DDC 150. I can't speak for the other suggested Aquacomputer matches, but the hex head screws are roughly 10 mm too long. If a person attempts to screw these in all the way they will break the pump top. as a work around for this problem i was gong to cut the 10mm off of the screw but luckily I had some #10 washers laying around 5 on each screw seated the pump perfectly and allowed me to mount the pump and res in my case. #10 washers should be able to be purchased at any hardware store. Other than that, the pump and pump cover are really good and would purchase again.