The new SmartMotion universal water block is a true all-rounder. It is suitable for all common motherboard – northbridge and southbridge - chips as well as NVIDIA® and ATI® GPU chips*.
Additionally, the water block can also be used on the video chip on NVIDIA graphics cards or for other special solutions.
This is made possible by the very flexible mounting system with pivoting mounting brackets. Should that not be enough, one additional mounting bracket is included to cover all mounting needs.
*The compatible hole spacings and pivoting radiuses can be seen in the PDF document.
The best part: the water block doesn’t have to be disassembled to replace the brackets; only a decorative plate has to be removed. For one-piece brackets a separate decorative plate is included. Should additional brackets be needed in the future, they can simply be ordered without having to purchase a completely new water block.
The performance is also truly amazing: The milled cooling structure in the pure copper cooling plate promises great cooling performance with high flow rates of 5 liters per minute – plenty for all high-flow systems.
The spacing between the G1/4” threads is 24mm from hole center to hole center, plenty for fittings with a large outer diameter.
- Universal chipset and GPU water block
- Top plate made from sturdy nickel-plated brass
- E-CU copper cooling plate with milled cooling fins
- Mounting brackets made from 3mm thick aluminum with aluminum decorative faceplate
- (WxLxH): 35 x 40 x 15mm (with screw head 16.65mm)
- Compatible with hole spacing from 45 up to 75mm
- Flow rate: 5 liters per minute
- Connection threads: G ¼"
- Weight: 46g
Extent of delivery:
- Smart Motion Universal
- screw kit
- 1 mounting bracket
Instructions for mounting: Download.
This product has been reviewed for you:
Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days.
We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool.
Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.
Faceți clic aici pentru a afișa această întrebare.
Faceți clic aici pentru a vedea aceste evaluări.
Das ist ein guter Chipsatz Kühler, optisch und von der Kühlleistung so wie vom Durchfluss. Wenn man die Winkel Halterungen benutzt passt alles mit allen Anschlüssen, aber mit der Geraden Halterung wird es sehr eng mit den 13/10 Anschlüssen was man aber um gehen kann in dem man die andere Abdeckung nutz.
ein sehr gutes Produkt das durch die beweglichen arme plus einen zweiten aufsatz auf southbridge ,northbridge, gpu chip einfach überall drafupasst,gut verarbeitet.
This is great item for cool down your PC as it does fit many board, due to "smart motion" ability. I will recommend such a product to whom, who wants to overclock/upgrade. Mostly suitable for bridges.
Habe es für meine Grafikkarte gekauft um die GPU damit zu kühlen. Und für den Preis ist der Kühler echt super. Seine Kühlleistung ist zwar nicht extrem groß aber trotzdem 50% besser als jede Luftkühlung. Im idle sind es gerade ma 28°C.. Beim Spielen für ca 1 bis 2 Stunden gerade mal 50 bis 60°C warm. Passt sehr gut auf alle Mainboard Chipsätze und auch für nVidia und Ati Grafikkarten.